Re: Low Disk Space Alert on Volume Space Available
The Volume Space Available and Volume Space Used values are in Bytes, not Gigabytes.
View ArticleRe: Differences between 6.1 RC3 and 6.1GC
There are zero differences between RC3 and the GA version released today. RC3 became the final GA bits, as Release Candidates should.
View ArticlePowershell cmdlet Extensions for Solarwinds SDK
Check it out: http://www.binaryagent.com/?p=217
View ArticleRe: "Down Interfaces" shows down Cisco, but not Brocade ports
Got some interesting results back from 1.3.6.1.2.1.2.2.1.7 that would work. snmpwalk -c public -v 2c 10.25.90.24 1.3.6.1.2.1.2.2.1.7IF-MIB::ifAdminStatus.805306369 = INTEGER:...
View ArticleHow to limit monitoring time ....
Hello, Is there any way to limit monitoring time for some nodes or groups? For example....let say monitor dc-01 only from 8am to 5pm. Thank you Sergey
View ArticleRe: Low Disk Space Alert on Volume Space Available
You could create your alert like this. VolumeType = Fixed Disk ANDVolumeSpaceAvailable < 1073741824 You do have to setup the actual space in bytes just as aLTeReGo posted. Hope this helps. Lester...
View ArticleRe: Configure LEM as a SYSLOG Server
Did you go into the console and enable the flow? It should be under the manager --> enableflow.
View ArticleClik here to view.
Re: Dynamic Title for SQL Report?
Nuts, we're on 5.5. I think the web report's not available to us yet.
View ArticleRe: Solarwinds Edit Resource: Custom Query
Hi everyone! Thank you all for helping me!I ended up talking to Solarwinds and they suggested I make a report and place it on the Summary page.I ended up doing just that. Cheryl
View ArticleRe: Alertcentral does not receive Orion alerts
Still waiting for a fix for this issue. Any news?
View ArticleRe: Solarwinds Upgrades (Orion, NPM, SAM & NCM)?
SolarWinds Knowledge Base :: Compatibility of SolarWinds Orion Products for Installation and Upgrade Between NPM and SAM there may be some version jumping you may have to do. NPM can go straight to...
View ArticleRe: Advanced Alert question
You need to set up Dependencies for each router. So when the router fails the systems dependent on it do not alert. Go to Settings > Manage Dependencies.
View ArticleRe: Configure LEM as a SYSLOG Server
We do have an existing connector for Hirschmann switches, but I don't know that it covers the firewalls. If you submit a support request let me know the ticket # and I can take a look.
View ArticleRe: Advanced Alert question
Thanks for the response,We do have dependencies set up for the equipment, I wonder if we just have them set up incorrectly then. We have it set where the parent is the router and the child is the...
View ArticleRe: Configuration Management Transfer Status Stuck Initializing
I have the same issue. At the moment I have 18 jobs stuck on initializing some of which are from executing a script and others from trying to download configurations. I can't cancel them or clear...
View ArticleRe: how to upgrade NPM and move to new server?
Hi!I confess, I am very scared and weary.I am moving my main poller (NPM, SAM, and UDT) to Virtual server, what will I need to do other than install NPM, SAM, and UDT to the VM?My database is on...
View ArticleRe: NPM 10.7 Upgrade - Report & Application Issues
Sorry for the delayed reply, have been having a slew of other things going on, as well as other uncovered issues after updates. For this issue, and others we were experiencing to be corrected I had to:...
View ArticleClik here to view.
Re: SAM 6.1 RC3 - Edit Application Monitor Polling Frequency
The save and continue working option would not do anything either. I had opened a support case (591945), but was unable to get this as well as another issue with polling intervals resolved.Ultimately...
View ArticleClik here to view.
nDepth histogram x-axis timezone incorrect
Hi Geeks, The timezone in x-axis is incorrect.When mouse-over the bar, the time is correct indeedWould you tell me how to fix it?Below is my screenshotThanks
View ArticleNetFlow export on physical interface and tunnel interface
Hello Everyone, Please clear my confusion here with subjected problem. I have installed NTA 4.0 and have added interface as well, now the problem is when i do it with a physical interface (where i have...
View Article