Re: Include VLAN ID in Top XX Subnets by % IP Address Used
It is no trouble as long as you are ok not getting the cool colored bar lines?http://thwack.solarwinds.com/message/194045#194045
View ArticleRe: Tips to use more secure protocols for SNMP and configuration backup?
Yes mate you can use whatever local account you have setup on the devices. Just enable ssh v2 and specify it on your vty lines and you should be good to go.
View ArticleRe: Poll for UCS - Credentials from what?
Hi Glen, Blade-1 is not supposed to be added as UCS (with credentials) but as ordinary node (SNMP, WMI...) in case it is not anoter UCS device. Cheers,Pavel
View ArticleRe: Can Neflow Traffic Analyzer tell me how much broadcast traffic I have on...
Is there a way to use wild cards for the subnets e.g. 192.168.*.255 . I've get an invalid address error when I enter it as an endpoint filter. Don't really want to enter 50+ broadcast addresses...
View ArticleRe: Database issue
The app is on whatever server you installed SolarWinds onto. It's difficult to give you exact advice on what to block. You need to review what your syslog server is capturing and work out your rules...
View ArticleRe: NPM and RSTP
hi,we would like to introduce support for STP and its alternatives into NPM. I would be very interested to talk to you directly.But to your case, what you mean by saying "switch show things as fine"?...
View ArticleRe: Get error configuring IMAP access to Exchange 2010
Hi Chris, Do you have any news about the test with Exchange 2010 ? Have a nice day, Antoine
View ArticleRe: Nexus Power supply,FAN monitoring
not sure what's the model of your nexus. but I would try:1.3.6.1.4.1.9.9.117.1.4.1 - fan status1.3.6.1.4.1.9.9.117.1.1.2 - power supp[y status
View ArticleRe: Database issue
Apologies, I couldn't find windows app or the yellow warning triangle icon. Kindly guide me through this??? I'll be grateful.
View ArticleRe: Client Page Edit ability
Hi davpunk, Ad 1) You just need to edit C:\Program Files\WebHelpDesk\conf\labels\Labels.properties or create your own following the README file in the same directory. Ad 2) You can hide request detail...
View ArticleRe: Not all Hostnames and IPs showing, only MAC address
Hi, You are correct. UDT is currently not able to poll information from Cisco ASA. These device don't expose the required information via SNMP. The only possibiliy is to establish a terminal session,...
View ArticleRe: Display interface as unplugged rather than down (even if its...
Bump - it looks like this is still the case with 10.6It makes sense to me that unplugged ports that are admin shutdown should inherit the admin shutdown icon until they are admin up.
View ArticleRe: Report Writer - Count Nodes
Got it- that would be difficult to do within the construct of the old report writer without resorting to custom SQL, and one of the reasons why we made sure to have multiple resources available in new...
View ArticleRe: Node in warning - why?
Bugger. Maybe the node went into warning state due to high CPU utilization. Might have to chalk this one up to "one of those things" if it doesn't happen again.
View ArticleRe: Device discovery and polling IP address
Can you actually ping the loopback address from the NPM server? Sounds like you can't which means that you need to take a look at your routing. Once you can ping the loopback address on your switch...
View ArticleRe: Device discovery and polling IP address
Yes I can ping the loopback IP addresses. For this specific example the NPM server is directly connected to the switch I am trying to discover. I can ping all interfaces on the switch including the...
View ArticleRe: How to Avoid "Monitoring Spam"
We monitor all switches, routers and wireless devices. Basic monitoring consists of up/down status. As mentioned groups can reduce the amount of emails we get for 1 particular event. From there, I have...
View ArticleRe: Device discovery and polling IP address
If you can ping the loopback address, then it should be discoverable by that address. So SNMP is being blocked. Check your ACL's to see if it's blocking SNMP access to the loopback address.
View Article